Automatic Insulating Glass Processing Solution

The LIJIANG Glass insulating glass double-filling and double-plate pressing production line, which includes a feeding section, a washing and drying section, a washing and discharging section, a storage section, an inspection and framing section, a flat pressing feeding section, an inflatable plate pressing section and a flat pressing discharging section. The inflatable plate pressing section includes a front moving plate, a rear fixed plate, left and right sealing plates, a conveyor belt and an inflating mechanism. The inflatable plate pressing section can inflate and press two pieces of glass less than 3 meters in length at the same time as needed, or press an extra large plate of glass.

The butyl extruder coating machine for insulating glass manufactured by LIJIANG Glass can quickly adjust the distance between the two coated heads to adapt to different specifications of aluminum spacer strips. It includes a frame and two independent sealant systems. Each sealant system includes a sealant extrusion cylinder and the sealant head is fixed relative to the sealant extrusion cylinder. The two sealant heads are juxtaposed with a certain distance to receive the aluminum spacer and apply butyl extruder coating on it. The frame is provided with a place for one of the coating systems to move The guide rail is used to adjust the distance between the two coated heads, and there is also a moving device that drives the coating system to move along the guide rail.

Given the large number of coated glasses such as Low-E coated glass and solar control film used in the current insulating glass processing market, various films must be removed around the butyl-coated glass, otherwise the service life of the insulating glass will be affected. Generally speaking, mechanical removal of glass surface film is the first choice. The recommended parameters for the film removal wheel of LIJIANG Glass Automatic Low-E Glass Film Removal Delecting Machine are air pressure 0.8MPa ~ 1.2MPa, rotation speed 1800 ~ 1900 r/min;The grinding wheel is made of emery or stainless steel wire below 0.15mu (100 mesh). No traces remain on the surface after film removal. The development direction is to set up grinding wheels according to different film systems.

The LIJIANG Glass Insulating Glass Sealing Robot Line adopts a large touch screen human-machine interface control system to realize automatic positioning of aluminum partition frames, automatic lifting and lowering of pressing, conveying, sealant coating, automatic timing heating and other functions. The equipment adopts advanced gas-liquid boosting technology to make the system pressure more stable and energy-saving. The system is equipped with an alarm system for running out of sealing, and a dual-group and dual-sealing supply configuration. Production will not be delayed during sealant replacement. The sealing head is adjustable within the range of 6-20mm and can be fine-tuned up and down.

The LIJIANG Glass high-precision insulating glass aluminum strips bending machine includes a transmission mechanism and a bending mechanism. The transmission mechanism includes a driving wheel, two fixed wheels and two transmission chains; the two fixed wheels are uploaded in the horizontal direction through a transmission chain dynamically connected; the driving wheel is drivingly connected to one of the fixed wheels through another transmission chain; the bending mechanism includes a rotatable pressure wheel and a height adjustment device; the pressure wheel and the two fixed wheels are located on the same vertical plane, and Located above the middle of the two fixed wheels; the height adjustment device is installed above the pressure wheel and adopts a screw structure to adjust the height of the pressure wheel with high precision.

The LIJIANG Glass insulating glass molecular sieve filling machine has a support frame fixedly installed in the middle of one side of the main body. A filling gun is fixed symmetrically above the support frame. A fixed seat is welded to the top and middle of the support frame. A fixed base is fixedly installed in the middle of the front end of the fixed base. The fixing frame has fixing slots in the middle of both sides of the fixing frame. An L-shaped push rod is movable inside the fixing slot. A movable pressure plate is installed on one side of the outer surface of the L-shaped push rod. This equipment prevents the filling gun from pushing the aluminum spacer up and down during filling, improves the overall stability of the aluminum spacer during filling, and thereby improves the overall filling efficiency of the aluminum spacer.

The main pump of the LIJIANG Glass manual two-component sealant applicator equipment is driven smoothly by the hydraulic system; the fully enclosed curing agent sealant path system prevents the curing agent from contacting with air and solidifying; the two-component proportioning structure is steplessly adjusted to meet accurate proportioning requirements; it adopts Internationally popular static reciprocating mixer, mixing more evenly.

The LIJAING Glass insulating glass sealant gun freezer includes a box shell, a low-temperature insulation tank, a high-temperature insulation tank, a compressor, and a fan installed on the shell wall. The insulation tank is connected to the compressor through a pipeline, and the top of the shell is equipped with Has a lid to ensure long-term temperature stability of the sealant gun.

The LIJIANG Glass insulating glass inert gas inflator equipment is used to inject inert gas inside the insulating glass to improve the heat insulation, sealing, sound insulation, energy saving and other properties of the insulating glass. It uses a gas purity analyzer imported from the United States and a gas sensor imported from Japan to ensure the stability of the inflator. The humanized appearance design makes the equipment beautiful and easy to operate. It is currently the most advanced insulating glass inflatable equipment.

This equipment is the link between the insulating glass butyl extruder coating machine and the insulating glass production line. The LIJIANG Glass LJSK02 Insulating Glass Aluminum Frame Hanging Conveyor Equipment is a special equipment for after storing and conveying the aluminum frame coated with sealant by the butyl extruder coating machine during the insulating glass production process.