Lavadora de vidrio en venta

The overall structure of the LJLQ-2000 vertical glass washing and drying machine is composed of four sections: inlet section, air-drying section, and outlet section. It is mainly composed of four major mechanisms: conveying, cleaning, strong wind, and inspection. It has the characteristics of strong decontamination ability, cleanliness, and good air-drying effect.

Know More

Características estructurales

• El cepillo cilíndrico en la parte de limpieza es transportado por una correa independiente del motor. El cepillo está hecho de material resistente a los ácidos y a altas temperaturas de alta calidad, que tiene un buen efecto de limpieza y una larga vida útil.
• Adopta un sistema de transmisión preciso y una regulación de velocidad de conversión de frecuencia, que se puede operar directamente en el panel para ajustar la velocidad de limpieza arbitrariamente.
• Los rodillos de goma transportadores de alta calidad están densamente dispuestos y pueden procesar diferentes tamaños de vidrio. Combinado con la transmisión de engranajes, la transmisión de vidrio es más estable.
• Usando un sistema eficiente de limpieza y secado al aire, el vidrio de diferentes espesores se puede limpiar y secar automáticamente; se limpia con un cepillo, se seca con un rodillo de esponja de alta calidad y luego se seca con aire caliente una vez para garantizar que el efecto de limpieza del vidrio sea limpio y brillante sin dejar rastros de manchas de limpieza.

Saber más

Parámetros:

1. Tamaño máximo del vidrio: 2000 mm x 2500 mm
2. Tamaño mínimo del vidrio: 2500 mm x 3000 mm
3. Dirección de trabajo frente al equipo
4. Velocidad de lavado: 2-10 m/min
5. Espesor del vidrio: 3-15 mm
6. Espesor del vidrio aislante: ≤40 mm
7. Suministro de agua: 0,5 toneladas/día de agua circulante, conductividad ≤40μS
8. Velocidad de lavado: 2-10 m/min
9. Altura de trabajo: 580 mm
10. Alimentación: 3P 380V 50Hz
11. Temperatura ambiente: 10°C-30°C, según DIN 40040
12. Humedad relativa del aire: ≤ 75 %, según DIN 40040

Saber más

La lavadora y secadora de vidrio LJLQ-2500 podría lavar vidrio máximo de 2500 mm * 3500 mm, un tamaño más grande y un tamaño menor pueden ser opcionales.

• Sistema de Autodiagnóstico con pantalla táctil en ordenador.
• Arandela de acero inoxidable con 8 (6) cepillos, cepillos suaves de MONFORTS de Alemania, los cepillos duros se abren automáticamente cuando entra vidrio de baja emisividad.
• Gire la velocidad del control de frecuencia del cepillo. (opcional)
• El cuchillo de aire de acero inoxidable se ajusta automáticamente según el grosor del vidrio, grosor máximo de 19 mm.
• Limpieza de alta velocidad (máx. 14 m/min), bajo nivel de ruido (máx. 70 dB), funcionamiento de alta disponibilidad. (25 segundos/unidad)
• Detección automática de vidrios Low-E y alarma por recubrimiento en reversa. (opcional)
• Estructura escalonada y unidad IG de tres capas disponibles. (opcional)
• Precisión de la prensa de placas: ±0,3 mm

Saber más

Características estructurales

• La lavadora de vidrio puede limpiar vidrio plano común o vidrio revestido con un espesor de 3 a 12 mm;
• El área de limpieza utiliza 3 pares de cepillos u opcionalmente 4 pares de cepillos (o cepillos suaves importados, de recubrimiento o especiales LOE), limpieza con dos o cuatro aguas;
• La máquina adopta una estructura vertical inclinada, el vidrio plano se coloca en el rodillo transportador, pasa por la sección de alimentación, la sección de limpieza y secado y llega a la sección de descarga para completar la tarea de limpieza del vidrio;
• El área de limpieza y el tanque de agua están hechos de acero inoxidable y materiales resistentes a la corrosión; el cuchillo de viento inclinado con viento fuerte puede secar la superficie del vidrio;
• La sección de descarga está equipada con lámparas de inspección para verificar la calidad de limpieza del vidrio. La máquina es fácil de operar y los botones de operación se concentran en la mesa de operaciones.

Saber más

Parámetros:

1. Tamaño máximo de vidrio: 2000 mm * 2500 mm
2. Tamaño mínimo de vidrio: 2500 mm * 3000 mm
3. Dirección de trabajo frente al equipo
4. Velocidad de lavado: 2-10 m/min
5. Espesor del vidrio: 3-15 mm
6. Espesor del vidrio aislante: ≤40 mm
7. Suministro de agua: 0,5 toneladas/día de agua en circulación, conductividad ≤40 μS
8. Velocidad de lavado: 2-10 m/min
9. Altura de trabajo: 580 mm
10. Potencia: 3P 380V 50Hz
11. Temperatura ambiente: 10°C-30°C, según DIN 40040
12. Humedad relativa del aire: ≤ 75 %, según DIN 40040

Saber más

Benefits & Advantages

Configuration of three pairs of brushes
Six high temperature resistant wire brushes with diameter of 180 mm + four sprays, the glass is cleaned and the speed is fast (10-12 m per minute). The first brush is equipped with two bristles and is lifted by a cylinder.

Water rust and corrosion resistant
The parts and screws in the cleaning box that are in contact with water are made of stainless steel, copper, waterproof aluminum, nylon and other materials. They will not rust after long-term use and are easy to maintain.

High efficiency air knives
Two pairs of stainless steel air knives are equipped with high wind power and good drying effect, with heating system. The unique circulating windshield drying system is energy-saving and low-noise (the wind temperature can reach 40 degrees without heating in winter).

Stainless steel structure
The air-drying box glass support frame is uniformly welded by high-strength stainless steel, and the whole washing parts of glass washing and drying equipment will be used for a long time without rust and will not cause secondary glass pollution.



Know More

La lavadora y secadora de vidrio horizontal LJWBQJ1800 se utiliza para lavar y secar las superficies superior e inferior del vidrio flotado ordinario y el vidrio de baja emisividad de alta calidad. Está compuesta por un segmento de entrada, un segmento de lavado y secado por aire y un segmento de salida. Esta arandela de tipo económico siempre se utiliza para el procesamiento de vidrio simple o aislante.

Saber más

Structural Characteristics

1. Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency；
2. The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder；
3. The rubber roller is made of vulcanized rubber with stainless steel shaft；
4. The washing part in contact with water is made of stainless steel；
5. Cleaning department, wind staff overall lift, the maximum lift：350 mm,easy to clean and maintain；
6. Three pairs of brush（Ø 150 mm）Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface)；
7. Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)；
8. The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning；
9. Main drive for gear transmission, frequency control, digital display, the rotation of the brush roller in the washing section is driven by independent belts of the upper and lower motors respectively, the frequency conversion adjustment speed is stable, the service life is long, realizes the cleaning high request special glass；
10. Mechanical button control, cleaning machine digital display, easy to operate, easy to operate, easy to maintain；
11. Washing machine water tank outside, convenient water tank cleaning, water change, check, so that the washing machine cleaning effect is cleaner.
12. Optional with PLC control, touch screen display.It is convenient for workers to operate and maintain, and can be connected to all manufacturers of edge grinding machines without gap.(purchase separately if necessary)

Know More

Item.	Spec.
Maximum glass width	2500 mm (effective maximum: 2650 mm)
Minimum glass specification	400 mm*400 mm (limited to single row on left and right sides)
Glass thickness	3 mm-25 mm (digital display)
Speed range	glass thickness within 3-25 mm V max=1-12 m/min
Main drive, brush speed regulation method	frequency control
Table height	900±25 mm
Total power	42 KW(water-bearing wind heating: 15 KW)
Water source	self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer)
Power source	380V 50Hz
Dimensions (length*width*height)	approximately 6260 mm*4800 mm*3100 mm
Weight	3940 kgs

Know More

Benefits & Advantages

The Imported Components
Using imported frequency converter and PLC control system, the speed of entering and exiting the glass can be adjusted freely, and the processing of clear glass can be maintained at a constant speed for a long time.

The 3 Pairs of Rubber Rollers
3 pairs of rubber rollers are used to press the glass sheets, which can achieve the effect of increasing the pressing strength in sequence, and the glass thickness tolerance is smaller than others suppliers.

The High-power Fan
The washing and drying equipment could be equipped with a high-power fan, the drying effect is better, and the cleaning effect of the glass is fully guaranteed.

The Gradient Pressing Method
According to the direction from the glass input to the output, the glass is gradually pressed by using a gradient pressing method. The pressing effect is better than other suppliers.


Know More

La lavadora de vidrio horizontal automática LJWQ-2500A consta de una sección de entrada, lavado, secado y salida. Para lograr un buen rendimiento de lavado y un secado rápido al aire, adopta 3 pares de cepillos y 2 pares de cuchillos de aire con 1 soplador de aire. Se adapta a vidrio templado, vidrio solar, vidrio laminado, vidrio Low-e o cualquier otro procesamiento de vidrio plano.

Saber más

Structural Characteristics

• Horizontal structure, simple operation. The machine frame adopts heavy thickness aluminum alloy to avoid to be out of shape when working for a longtime.
• With stainless steel water sink and high pressure pre-spraying (high pressure pump) in loading ( in-feed), the rubber roller can pre-wash automatically to clean out the glass powder or scraps.
• Brush: The top and bottom brushes transmit by 1 motor respectively.
• Water tank (with heater):
• 2 water tanks total, 1 for pre-wash, another for washing section.
• Blower: Low noise and vibration.
• Conveying adopts frequent converter, digital display and convenient operation, which do good to connect with double edging line, hollow glass line, safety glass line, etc. Table rollers adapt superior rubber and transmitted by gear wheel which makes a stable working.
• Side covers and tanks and any other water touched material adopt stainless steel 201.
• Washing and Drying section can be lifted to Max. 400 mm by adjustment on electrical board with 4 legs(corners) increasing through motors and encoder.
• 2 pairs air knives adopt advanced technique device, large power and quick air dry.

Know More

Item.	Parameter.
Max. width	2500mm
Min. size	400*400mm
Glass thickness	3~28mm
Working table height	900mm±30mm
Blower power	22kw
Total power	32kw
Weight	3000kg
Dimension	5700*3300*2500mm
Low-e require	Yes
Water heater	Yes
Processing speed	0.5~12m/min
Processing-speed suggestion as follow:
4mm~8mm thickness, speed suggested to 8-12m/min
10mm~12mm thickness, speed suggested to 4~6m/min
15mm~19mm thickness, speed suggested to 2-3m/min
20mm and more, speed suggested to 0.5-1.5m/min

Item.	Spec.
Main machine frame	Aluminum alloy + steel, no deformation.
High pressure pump	China famous brand: Shanqing
Frequency converter of conveying	China famous brand: Kailida
Brush motor	China famous brand: Jinxing
Bearing	China famous brand: HRE
Electrical Appliance	Schneider
Rubber roller	NBR Perduran(sour liquid forbiddion), stainless steel 304 shaft
Water tank, sink, side covers, all parts touch water	Stainless steel 201
PLC	Siemens

Know More

Benefits & Advantages

The Aluminum Alloy Structure
The whole cleaning equipment adopts aluminum alloy assembled tripod, which is stable and durable, not easy to change. The surface of the aluminum alloy aluminum profile adopts negative oxidation treatment, which is not easy to be corroded by water.

The Water Tank Adopts #201 Stainless Steel
The water tank, the shield and the place in contact with the water are made of #201 stainless steel, which is harder than #304 stainless steel and contains high manganese. Chromium-rich oxides will be formed on the surface of the steel body to protect the steel body from water rust

The Gear Transmission
The equipment adopts gear transmission as a whole, and the transmission efficiency is high, generally η=0.94～0.99; the transmission ratio has a wide range, especially when planetary transmission is used, the transmission ratio can reach 100-200 (single-stage), which is suitable for deceleration or Speed-increasing transmission; reliable operation and long service life.

The Lifting System
The lifting system is driven by a servo motor, driven by a lifting screw, and combined with a gear drive. It has the characteristics of low friction loss, high transmission efficiency, and high axial rigidity. In addition, the starting torque of ball screw pair is Smaller, there will be no crawling phenomenon like sliding motion, and it can ensure the realization of precise micro-feed and high-speed feed.

The Rubber Roller Transmission
The feeding port and the discharging port of the equipment adopt frequency conversion transmission, and the operation screen is displayed for easy operation. The rubber roller is made of high-quality nitrile rubber, driven by gears, and runs smoothly. It can be connected with edging line, hollow line and laminated line for data connection and unified control.

The Imported PLC Control System
The PLC control system can be equipped with the Taiwan Delta or Germany Siemens control system according to the actual requirements of the customer. The PLC control system can be directly connected to the network, connecting the loading and unloading CNC robots to achieve a smart factory with integrated operation.



Know More