Lavadora y secadora de vidrio horizontal automática LJWBQJ-1800

Auotmatic Adjustable Temperature and Conveying Speed Glass Washing and Drying Machine 

with Hot Press and Heat Sealing Function

Product Description

Automatic Horizontal Glass Washing and Drying Machine

Advantages & Features

Structural Characteristics

1. Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency； 

2. The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder； 

3.  The rubber roller is made of vulcanized rubber with stainless steel shaft； 

4.  The washing part in contact with water is made of stainless steel； 

5.  Cleaning department, wind staff overall lift, the maximum lift 350mm, easy to clean and maintain； 

6.  Three pairs of brush（Ø150mm）Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface)； 

7.  Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)； 

8.  The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan     box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning； 

9.  Main drive for gear transmission, frequency control, digital display, the rotation of the brush roller in the washing section  is driven by independent belts of the upper and lower motors respectively, the frequency conversion adjustment speed is stable, the service life is long, realizes the cleaning high request special glass； 

10. Mechanical button control, cleaning machine digital display, easy to operate, easy to operate, easy to maintain； 

11. Washing machine water tank outside, convenient water tank cleaning, water change, check, so that the washing machine cleaning effect is cleaner. 

12. Optional with PLC control, touch screen display.It is convenient for workers to operate and maintain, and can be connected to all manufacturers of edge grinding machines without gap.(purchase separately if necessary)

The Imported Components

Using imported frequency converter and PLC control system, the speed of entering and exiting the glass can be adjusted freely, and the processing of clear glass can be maintained at a constant speed for a long time.

The 3 Pairs of Rubber Rollers

3 pairs of rubber rollers are used to press the glass sheets, which can achieve the effect of increasing the pressing strength in sequence, and the glass thickness tolerance is smaller than others suppliers.

The High-power Fan

The washing and drying equipment could be equipped with a high-power fan, the drying effect is better, and the cleaning effect of the glass is fully guaranteed.

The Gradient Pressing Method

According to the direction from the glass input to the output, the glass is gradually pressed by using a gradient pressing method.The pressing effect is better than other suppliers.

Specification