Glass Washing Machine for Sale

The overall structure of the LJLQ-2000 vertical glass washing and drying machine is composed of four sections: inlet section, air-drying section, and outlet section. It is mainly composed of four major mechanisms: conveying, cleaning, strong wind, and inspection. It has the characteristics of strong decontamination ability, cleanliness, and good air-drying effect.

Know More

Strukturelle Eigenschaften

• Die Bürstenwalze im Reinigungsteil wird von einem unabhängigen Riemen des Motors transportiert. Die Bürste besteht aus hochwertigem säurebeständigem und hochtemperaturbeständigem Material, das eine gute Reinigungswirkung und lange Lebensdauer hat.
• Es verwendet ein präzises Übertragungssystem und eine Frequenzumwandlungsgeschwindigkeitsregelung, die direkt auf dem Bedienfeld betrieben werden kann, um die Reinigungsgeschwindigkeit beliebig einzustellen.
• Dicht angeordnet sind hochwertige Fördergummiwalzen, die unterschiedliche Glasgrößen verarbeiten können. In Kombination mit der Getriebeübertragung ist die Glasübertragung stabiler.
• Mit einem effizienten Reinigungs- und Lufttrocknungssystem können Gläser unterschiedlicher Dicke automatisch gereinigt und getrocknet werden; Es wird mit einer Bürste gereinigt, mit einer hochwertigen Schwammrolle getrocknet und dann einmal mit Heißluft getrocknet, um sicherzustellen, dass die Reinigungswirkung des Glases sauber und hell ist, ohne Spuren von Reinigungsflecken zu hinterlassen.

Mehr wissen

Parameter:

1. Maximale Glasgröße: 2000 mm*2500 mm
2. Mindestglasgröße: 2500 mm x 3000 mm
3. Arbeitsrichtung gegenüber dem Gerät
4. Waschgeschwindigkeit: 2-10 m/min
5. Glasdicke: 3-15 mm
6. Isolierglasdicke: ≤40 mm
7. Wasserversorgung: 0,5 Tonnen/Tag Umlaufwasser, Leitfähigkeit ≤40μS
8. Waschgeschwindigkeit: 2-10 m/min
9. Arbeitshöhe: 580 mm
10. Leistung: 3P 380 V 50 Hz
11. Umgebungstemperatur: 10°C-30°C, nach DIN 40040
12. Relative Luftfeuchtigkeit: ≤ 75 %, nach DIN 40040

Mehr wissen

Die Glaswasch- und Trocknungsmaschine LJLQ-2500 kann ein maximales Glas von 2500 mm * 3500 mm waschen, größere und kleinere Größen können optional sein.

• Selbstdiagnosesystem mit Touchscreen am Computer.
• Edelstahlwascher mit 8 (6) Bürsten, weiche Bürsten von MONFORTS of Germany, harte Bürsten öffnen automatisch bei Low-E-Glaseingang.
• Drehgeschwindigkeit der Bürstenfrequenzsteuerung. (Optional)
• Das Edelstahl-Luftmesser ist automatisch je nach Glasdicke einstellbar, maximale Dicke bis 19 mm.
• Hochgeschwindigkeitsreinigung (max. 14 m/min), geräuscharm (max. 70 dB), hochverfügbares Arbeiten. (25 Sekunden/Einheit)
• Automatische Erkennung von Low-E-Glas und Alarm für Rückwärtsbeschichtung. (Optional)
• Struktur gestufte und dreischichtige IG-Einheit verfügbar. (Optional)
• Präzision der Plattenpresse: ±0,3 mm

Mehr wissen

Strukturelle Eigenschaften

• Die Glaswaschmaschine kann gewöhnliches Flachglas oder beschichtetes Glas mit einer Dicke von 3 bis 12 mm reinigen;
• Der Reinigungsbereich verwendet 3 Bürstenpaare oder optional 4 Bürstenpaare (oder importierte weiche Bürsten, Beschichtung oder LOE-Spezial), zwei oder vier Wasserreinigungen;
• Die Maschine nimmt eine geneigte vertikale Struktur an, das Flachglas wird auf die Förderwalze gelegt, durchläuft den Zufuhrabschnitt, den Reinigungs- und Trocknungsabschnitt und erreicht den Entladeabschnitt, um die Glasreinigungsaufgabe abzuschließen.
• Der Reinigungsbereich und der Wassertank sind aus Edelstahl und korrosionsbeständigen Materialien gefertigt; Das geneigte Windmesser kann bei starkem Wind die Glasoberfläche trocknen;
• Der Entladungsabschnitt ist mit Inspektionslampen ausgestattet, um die Reinigungsqualität des Glases zu überprüfen. Die Maschine ist einfach zu bedienen und die Bedientasten sind auf dem OP-Tisch konzentriert.

Mehr wissen

Parameter:

1. Maximale Glasgröße: 2000 mm*2500 mm
2. Min. Glasgröße: 2500 mm*3000 mm
3. Arbeitsrichtung zum Gerät gerichtet
4. Waschgeschwindigkeit: 2-10 m/min
5. Glasstärke: 3-15 mm
6. Isolierglasdicke: ≤40 mm
7. Wasserversorgung: 0,5 Tonnen/Tag zirkulierendes Wasser, Leitfähigkeit ≤40μS
8. Waschgeschwindigkeit: 2-10 m/min
9. Arbeitshöhe: 580 mm
10. Leistung: 3P 380V 50Hz
11. Umgebungstemperatur: 10°C-30°C, nach DIN 40040
12. Relative Luftfeuchtigkeit: ≤ 75 %, nach DIN 40040

Mehr wissen

Benefits & Advantages

Configuration of three pairs of brushes
Six high temperature resistant wire brushes with diameter of 180 mm + four sprays, the glass is cleaned and the speed is fast (10-12 m per minute). The first brush is equipped with two bristles and is lifted by a cylinder.

Water rust and corrosion resistant
The parts and screws in the cleaning box that are in contact with water are made of stainless steel, copper, waterproof aluminum, nylon and other materials. They will not rust after long-term use and are easy to maintain.

High efficiency air knives
Two pairs of stainless steel air knives are equipped with high wind power and good drying effect, with heating system. The unique circulating windshield drying system is energy-saving and low-noise (the wind temperature can reach 40 degrees without heating in winter).

Stainless steel structure
The air-drying box glass support frame is uniformly welded by high-strength stainless steel, and the whole washing parts of glass washing and drying equipment will be used for a long time without rust and will not cause secondary glass pollution.



Know More

LJWBQJ1800 Horizontale Glaswasch- und Trocknungsmaschine zum Waschen und Trocknen der Ober- und Unterseite von gewöhnlichem Floatglas und hochwertigem Low-E-Glas. Sie besteht aus einem Eingangssegment, einem Waschlufttrocknungssegment und einem Ausgangssegment. Diese wirtschaftliche Art Waschmaschine wird immer für die Einzelglas- oder Isolierglasbearbeitung eingesetzt.

Mehr wissen

Structural Characteristics

1. Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency；
2. The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder；
3. The rubber roller is made of vulcanized rubber with stainless steel shaft；
4. The washing part in contact with water is made of stainless steel；
5. Cleaning department, wind staff overall lift, the maximum lift：350 mm,easy to clean and maintain；
6. Three pairs of brush（Ø 150 mm）Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface)；
7. Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing)；
8. The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning；
9. Main drive for gear transmission, frequency control, digital display, the rotation of the brush roller in the washing section is driven by independent belts of the upper and lower motors respectively, the frequency conversion adjustment speed is stable, the service life is long, realizes the cleaning high request special glass；
10. Mechanical button control, cleaning machine digital display, easy to operate, easy to operate, easy to maintain；
11. Washing machine water tank outside, convenient water tank cleaning, water change, check, so that the washing machine cleaning effect is cleaner.
12. Optional with PLC control, touch screen display.It is convenient for workers to operate and maintain, and can be connected to all manufacturers of edge grinding machines without gap.(purchase separately if necessary)

Know More

Item.	Spec.
Maximum glass width	2500 mm (effective maximum: 2650 mm)
Minimum glass specification	400 mm*400 mm (limited to single row on left and right sides)
Glass thickness	3 mm-25 mm (digital display)
Speed range	glass thickness within 3-25 mm V max=1-12 m/min
Main drive, brush speed regulation method	frequency control
Table height	900±25 mm
Total power	42 KW(water-bearing wind heating: 15 KW)
Water source	self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer)
Power source	380V 50Hz
Dimensions (length*width*height)	approximately 6260 mm*4800 mm*3100 mm
Weight	3940 kgs

Know More

Benefits & Advantages

The Imported Components
Using imported frequency converter and PLC control system, the speed of entering and exiting the glass can be adjusted freely, and the processing of clear glass can be maintained at a constant speed for a long time.

The 3 Pairs of Rubber Rollers
3 pairs of rubber rollers are used to press the glass sheets, which can achieve the effect of increasing the pressing strength in sequence, and the glass thickness tolerance is smaller than others suppliers.

The High-power Fan
The washing and drying equipment could be equipped with a high-power fan, the drying effect is better, and the cleaning effect of the glass is fully guaranteed.

The Gradient Pressing Method
According to the direction from the glass input to the output, the glass is gradually pressed by using a gradient pressing method. The pressing effect is better than other suppliers.


Know More

Die automatische horizontale Glaswaschmaschine LJWQ-2500A besteht aus einem Einzugs-, Wasch-, Trocknungs- und Auszugsbereich. Um eine gute Waschleistung zu erzielen und schnell an der Luft zu trocknen, werden 3 Paar Bürsten und 2 Paar Luftmesser mit 1 Luftgebläse verwendet. Es eignet sich für gehärtetes Glas, Solarglas, Verbundglas, Low-E-Glas oder jede andere Flachglasverarbeitung.

Mehr wissen

Structural Characteristics

• Horizontal structure, simple operation. The machine frame adopts heavy thickness aluminum alloy to avoid to be out of shape when working for a longtime.
• With stainless steel water sink and high pressure pre-spraying (high pressure pump) in loading ( in-feed), the rubber roller can pre-wash automatically to clean out the glass powder or scraps.
• Brush: The top and bottom brushes transmit by 1 motor respectively.
• Water tank (with heater):
• 2 water tanks total, 1 for pre-wash, another for washing section.
• Blower: Low noise and vibration.
• Conveying adopts frequent converter, digital display and convenient operation, which do good to connect with double edging line, hollow glass line, safety glass line, etc. Table rollers adapt superior rubber and transmitted by gear wheel which makes a stable working.
• Side covers and tanks and any other water touched material adopt stainless steel 201.
• Washing and Drying section can be lifted to Max. 400 mm by adjustment on electrical board with 4 legs(corners) increasing through motors and encoder.
• 2 pairs air knives adopt advanced technique device, large power and quick air dry.

Know More

Item.	Parameter.
Max. width	2500mm
Min. size	400*400mm
Glass thickness	3~28mm
Working table height	900mm±30mm
Blower power	22kw
Total power	32kw
Weight	3000kg
Dimension	5700*3300*2500mm
Low-e require	Yes
Water heater	Yes
Processing speed	0.5~12m/min
Processing-speed suggestion as follow:
4mm~8mm thickness, speed suggested to 8-12m/min
10mm~12mm thickness, speed suggested to 4~6m/min
15mm~19mm thickness, speed suggested to 2-3m/min
20mm and more, speed suggested to 0.5-1.5m/min

Item.	Spec.
Main machine frame	Aluminum alloy + steel, no deformation.
High pressure pump	China famous brand: Shanqing
Frequency converter of conveying	China famous brand: Kailida
Brush motor	China famous brand: Jinxing
Bearing	China famous brand: HRE
Electrical Appliance	Schneider
Rubber roller	NBR Perduran(sour liquid forbiddion), stainless steel 304 shaft
Water tank, sink, side covers, all parts touch water	Stainless steel 201
PLC	Siemens

Know More

Benefits & Advantages

The Aluminum Alloy Structure
The whole cleaning equipment adopts aluminum alloy assembled tripod, which is stable and durable, not easy to change. The surface of the aluminum alloy aluminum profile adopts negative oxidation treatment, which is not easy to be corroded by water.

The Water Tank Adopts #201 Stainless Steel
The water tank, the shield and the place in contact with the water are made of #201 stainless steel, which is harder than #304 stainless steel and contains high manganese. Chromium-rich oxides will be formed on the surface of the steel body to protect the steel body from water rust

The Gear Transmission
The equipment adopts gear transmission as a whole, and the transmission efficiency is high, generally η=0.94～0.99; the transmission ratio has a wide range, especially when planetary transmission is used, the transmission ratio can reach 100-200 (single-stage), which is suitable for deceleration or Speed-increasing transmission; reliable operation and long service life.

The Lifting System
The lifting system is driven by a servo motor, driven by a lifting screw, and combined with a gear drive. It has the characteristics of low friction loss, high transmission efficiency, and high axial rigidity. In addition, the starting torque of ball screw pair is Smaller, there will be no crawling phenomenon like sliding motion, and it can ensure the realization of precise micro-feed and high-speed feed.

The Rubber Roller Transmission
The feeding port and the discharging port of the equipment adopt frequency conversion transmission, and the operation screen is displayed for easy operation. The rubber roller is made of high-quality nitrile rubber, driven by gears, and runs smoothly. It can be connected with edging line, hollow line and laminated line for data connection and unified control.

The Imported PLC Control System
The PLC control system can be equipped with the Taiwan Delta or Germany Siemens control system according to the actual requirements of the customer. The PLC control system can be directly connected to the network, connecting the loading and unloading CNC robots to achieve a smart factory with integrated operation.



Know More